Table of Content
There are plenty of options available, and the market is totally saturated in some respects. It can be really easy to just go and buy an expensive cable and expect it to work. Getting the right cables for the job really doesn’t have to be a struggle. Providing you know what cable your device needs, the hardest part deciding which one suits.
If you notice that they wiggle, then it’s time to redo the process from the first step. Disconnect the wires from the speaker system and bend them to face upwards. They should have about one inch of exposed metal since you’ll be melting the wires together.
(Optional) Attach the Wires With Shrink Tubing
They shouldn’t come apart when you wiggle the wires or pull on them. Once you’re sure that the twist is perfect, grab your wire nuts and head to the next step. Butt connectors, butt splices, and crimp connectors all mean the same thing. They’re designed to keep two wires together by clamping plastic onto the wires.
For standard audio and visual cables, you want to start considering alternatives over distances of 10ft, although this will vary depending on the cable. If it doesn’t have an impact on the device’s performance, it can impact conductivity and the lifespan of cables. Ensure your devices have plenty of space around them, and whatever you do, don’t pile them all into a cupboard with the door shut. This isn’t necessarily connected to wiring, but it’s always worth mentioning. Many devices in a home theater system produce a lot of heat, which is never a good thing for electronics. This might seem incredibly basic, but it’s surprising how easy this is to get wrong.
HEAVY DUTY 6.2/6mm/12 FOOT HIGH QUALITY SPEAKER CABLE FOR OLDER HOME THEATERS
You can use the crimping tool or the wire cutters if they have gauge slots. All you have to do is locate the number on the tool, slide the wire through, squeeze, and pull the rubber. Next, you’ll need to disconnect the speakers from the entertainment system. This might seem obvious, but you’d be surprised to know the number of people who forget it.
Home theater systems are all about entertainment, but there’s nothing fun about short wires that won’t reach the wall. Choosing the right type of speaker wires for your needs can be difficult, but there’s plenty of information available online to help you work it out. Thinner wires will be suitable for connections under approximately 50ft. They also function well with high impedance speakers , and are usually cheaper than thick wires.
Get the right cables for your speakers
DVI stands for digital video interface, and these are specifically designed to get the most out of an LCD monitor. The only problem with copper is that it corrodes, which will obviously have a negative impact on conductivity.
Butt splices have metal inside that allows the electrical connection to continue through the splice. Using the soldering gun, solder the twisted wires onto the node. Again, you’ll have to do it in small half-second bits to prevent corrosion and broken wires. Again, you shouldn’t pull too tightly, or you ruin the connection. Do it enough to check if they’ll fall out if someone trips over the wire or the speaker falls out of place.
Sony Home Home Theater Speaker Systems
For example, a passive HDMI cable can carry signals around 25ft without any reduction in quality, and an active one can do up to 100ft. An audio cable, on the other hand, can typically do about 10/15ft before any loss of quality occurs. Plan your layout carefully before buying cables, and make sure to minimize distance as much as possible. This way, you’ll be able to use higher quality, more expensive cables and still get top performance. If one of the connections is wrong, your system is called subtractive.
Much like you would’ve done in the crimping method, expose about one inch of the wire. Slide the wires into both ends of the crimping tube, ensuring that the wires touch and overlap one another. Some people prefer to twist the wires inside of the tube for extra security. Buying cables is probably the most boring part of setting up a home theater, but it’s possibly one of the most important. Again, resistance increases with length, so if you’re using a lot of wire, make sure the resistance is low.
To extend home theater speaker wires, start by turning off the breaker, disconnecting the wires, and examining the gauge size. Next, get the proper gauge at a hardware store, then choose how you’ll connect the wires. Crimping, soldering, using wire nuts, and shrink tubing are all good choices.
Extending your home entertainment system’s speaker wires is simple when you break it down correctly. With the proper tools, none of the methods should take longer than half of an hour. Let it cool down, then lightly tug the wires on both ends to check for a secure connection.
It’s a tedious process, but it’s just about as tough as it gets once you finish. You won’t need to worry about loose wires or broken connections for many years to come. Ensure that they’re squeezed and twisted tightly to prevent them from loosening.
Head to the other side of the cables connected to the speakers and test them. When you’re finished testing the power at the breaker box, you’re not quite finished. Test the wires at the home entertainment system, so you know it’s turned off. Some cables are incorrectly labeled, so it’s good to follow this step for safety purposes. Get butt splices that match the gauge of the wire you’re using. Place wire into the butt splice on both sides, one from the speaker system and one from the new wire.
If your speakers plug into the wall, all you have to do is unplug them and set them aside. Note that some speakers are wired together, then wired into a wall outlet. In those circumstances, you could label them as you did in the previous step or keep them wired together and unplugged at the outlet.
More resistance means quieter and less clear sounds, so it’s important to keep a check on this. Using the crimping tool, firmly squeeze the butt splice over the wire. You should be able to tug the wire without it wiggling or coming out of the connection. Move down the splice and squeeze the crimping tool until you reach the end. Repeat this process for both wires connected to the butt splice. If you squeeze the trigger for too long, it’ll burn the wires and ruin the connection.
No comments:
Post a Comment